How To Snake A Toilet With A Hanger !free! May 2026

Gently feed the straightened hanger into the toilet bowl’s drain hole—the one at the bottom, not the little jet hole near the rim. Push slowly. You’ll feel resistance. That’s the trap. The toilet’s internal pipe curves up and then down like a gymnast’s backbend. Push past the first curve with gentle, twisting motions.

Pull the hanger out slowly. Prepare for the reveal. It might be a wad of wet hair, a child’s hairpin, or—in legendary cases—a dental floss “spider” that’s been collecting debris for months. Drop the horror directly into a trash bag. how to snake a toilet with a hanger

Here’s an interesting, step-by-step guide on how to snake a toilet using a wire coat hanger—a classic, low-budget plumbing hack for when you’re in a pinch and don’t have a real auger. The Coat Hanger Maneuver: A Toilet’s Last Hope Before the Plumber Gently feed the straightened hanger into the toilet

Put on gloves. Lay the towel around the base of the toilet. Turn off the water supply valve (the little knob behind the toilet) to prevent surprise geysers. Flush once to lower the water level, leaving just a murky puddle. That’s the trap

It’s ugly, it’s desperate, and it works more often than it should. Just remember: real plumbers use a closet auger. Real legends use a hanger.